Groundwater Sampling Pumps

Groundwater Sampling Pumps

The purpose of groundwater sampling is to retrieve a sample that is representative of the in-situ chemical characteristics of water in the formation. We supply a range of groundwater sampling pumps to enable you to achieve this purpose.

Request information   Request quote

Piston Pump

Bennett Sample Pumps

Bennett Submersible Piston Pump

The Bennett Sample Pumps have an automatic reciprocating piston motor operated by compressed air, that generates power for operating a double acting piston fluid pump. Models for lifts up to 170 metres have one motor piston. Models for lifts up to 330 metres have two motor pistons, providing increased power for operating the pump.

Peristaltic Pump

Geotech Geopump

Geotech Geopump Series II Peristaltic Pump

The Geopump Peristaltic Pump is designed for pumping liquids from groundwater wells or open water channels. It uses the proven Masterflex Easy Load II pump head. The pump kit operates from a 12V DC internal battery giving up to 4 hours of pumping or from an external power source such as your vehicle battery.

Electric Submersible Pumps

Proactive Environmental

Proactive Environmental 12V Submersible Pumps

Simplify your field sampling with the Proactive Environmental 12V Groundwater Pumps, designed for 50mm bores. Connect to a power source such as the battery of a running car and you are ready to purge and sample your groundwater wells.

Proactive Environmental Abyss Slimline® 12V Submersible Pump

The Engineered Plastic 12-volt Abyss Slimline® pump is capable of pumping up to 220 feet depth to water (DTW)* by simply connecting the Abyss Slimline® to a 12-volt deep cycle battery. Its reliable design and low amp consumption makes it the ideal pump for remeditation pump and treat system. The Abyss Slimline® pump can run continuously, 24 hours a day, 7 days a week for remote situations when the pump needs to run when no technician is present.

Proactive Environmental Abyss

Inertial Pumps

Waterra Inertial Pumps (Foot Valve)

Waterra Inertial Pumps systems are available in four (4) performance ranges: Standard Flow, High Flow, Low Flow and Micro Flow. Within each flow range system are an assortment of different foot valves and tubing for different sampling requirements. The performance of each flow range is defined by its tubing diameter - the larger the tubing the greater the flow rate and depth capability.

Micropurge/Low Flow Sampling Pumps

Sample Pro

QED Sample Pro® Portable Micropurge Pump

The Sample Pro® Portable Pump, the first pump developed specifically to bring the advantages of low-flow sampling to sites requiring portable pumps, and the pump's reliability and low maintenance make it more economical to use. The Sample Pro® portable pump combines the unparalleled sample accuracy and high reliability of a bladder pump in an easy-to-use design. It runs cool and can run dry without damage, and can be operated using any of QED's MicroPurge controller options - 12-volt integral compressor, a Honda-powered gasoline-driven compressor, an external compressed air cylinder, or a lightweight backpack with integral CO2 cylinder.

QED Well Wizard® Dedicated Micropurge Pump

Well Wizard® pumps for MicroPurge® low-flow groundwater sampling systems come in an unsurpassed range of sizes, materials, and capabilities, including models for deep sampling wells, narrow or obstructed casings, and small-volume pumps for low-yield monitoring wells. Together with MicroPurge controllers, flow cells, and accessories, they create the most reliable, cost-effective low-flow groundwater sampling system available.

Well Wizard
MP10 Digital Controller

QED MicroPurge® MP10 Digital Controller

The MicroPurge® MP10 Controller revolutionises low-flow ground water sampling with advanced logic control of purge flow and well drawdown. Simple up-down arrow keys increase and decrease purge flow to meet low-flow requirements. Once optimised, settings can be easily recalled in the next round of sampling.

QED MicroPurge® MP15 Controller Power Pack

The MP15 MicroPurge® Backpack combines advanced low-flow control with the quiet power of a built-in compressed gas source, for the ultimate in portability and ease of use in sampling ground water with bladder pumps. The MicroPurge MP15 Controller revolutionizes low-flow ground water sampling with advanced logic control of purge flow and well drawdown. Simple up-down arrow keys increase and decrease purge flow to meet low-flow requirements. Once optimized, settings can be easily recalled in the next round of sampling.

MP15 Controller Pack
MP30 Drawdown Meter

QED MP30 Micropurge® Drawdown Meter

Limiting drawdown is one of the basic requirements of proper low-flow sampling. The MicroPurge® MP30 Drawdown/Water Level Meter provides a unique and simpler way to assure proper drawdown control. The MP30 switches between two modes- as a drawdown sensor and control when connected to the MicroPurge basics controllers, and as a high quality water level meter.

QED MP50 Micropurge® Controller Compressor Combo

QED has combined its rugged and reliable fan-cooled 12 VDC air compressor with the time-proven QED MicroPurge® Basics controller to provide an "all-in-one" package. The MP50 also offers an easy way to prevent excessive monitoring well drawdown during purging, by linking to the optional MP30 Drawdown/Water Level Meter. You will purge and sample quickly and easily, with precise, steady low-flow pumping rates from one sampling event to the next.

MP50 Controller Compressor

Accessories

Pump Accessories

Groundwater Sampling Pump Accessories

A range of compressors, wellcaps, tubing, tubing cutter and reels for use with groundwater pumps.

Contact Us















Contact Us